Swimming Pool Sand Filter

There are two main types of sand filters : multiport and slide-valve. Multiports are installed on the side of the tank and feature plastic inlet and outlet unions. The slide-valve design is simpler, with only two positions - the inlet and outlet unions. These valves should be cleaned regularly. Both types require cleaning and maintenance. To maintain the filter, the water should be filtered at least once a year.

The sand filter is designed to catch the smallest particles, so large materials will not pass through. Smaller particles between 20 and 100 microns will be trapped. The sand filter can also contain particles smaller than 20 microns. The sand filter's filtering capacity is very high, so if your sand filter breaks down, you may need to replace the entire unit. You may also need to clean the system with a chemical dephosphatiser, if the sand in the tank becomes contaminated.

A sand filter is an older form of  swimming pool sand filter. A sand filter is basically a large spherical tank that traps dirt and other particles. This results in cleaner water. The sand filter's housing is made of plastic, fiberglass, or stainless steel. This type of material is highly durable and withstands a high pressure. Sand filters are not cheap. However, if you are considering a sand filter for your pool, make sure to consider the advantages and disadvantages of both types.

Before buying a pool sand filter, you should first determine the size of the pool. This size determines how much sand your pool will need. Remember to factor in the number of hours you will be using the pool. A 24-inch filter will fit most inground pools. Those with larger pools need a 36-inch or higher sand filter. Purchasing a smaller sand filter may result in overcrowding.

Changing the sand filter regularly will keep your pool clean. Changing it regularly will improve the efficiency of your circulating system and will maintain a clear water for your family. Sand filters can last anywhere from five to twenty years, depending on the model and the amount of dirt they collect. The sand in your sand filter is made of sharp edges, which help capture debris. If you fail to do this, the edges of the sand will wear down. A damaged sand filter may also develop limescale, which is like a magnet for sand. It will clump and lose its filtering efficiency.

sand filter

swimming pool sand filter

pool sand filter